Swinging Door Hardware

IDC DL-4510 Storefront Aluminum Door Deadlatch Lock. 1-1/8" BACK SET. Latchbolt 1/2" throw, Chrome plated with Delrin insert for smooth quiet latching. Lock accepts standard 1-5/32" mortise key or thumbturn cylinders with AR MS-Type cam. Key controlled...

IDC FB-2202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FP-1823-AL Radius Face Plate With Mohair Weatherstripping. Fits DH-1820-H hook latch and DH-1820-S short throw style deadlocks. 1" x 6 7/8". Available in two colors.

IDC IP-1902 Aluminum 3/4" Offset Right Hand Intermediate Pivot Set. Mortise style for use with aluminum doors and frames. Choice of three colors.

IDC DT-1850 Storefront Aluminum Door Long Throw Bolt Deadlock. 1-1/8" BACK SET. Bolt 1-3/8" throw, made of 5 ply laminated steel with a hardened roller pin in a case hardened center ply for maximum security. Lock accepts standard 1-5/32" mortise key or...

IDC CG 4043 Storefront Aluminum Door Mortise Key Cylinder Lock Guard. For standard face 5 pin mortise lock cylinder. Hardened steel security ring. Free-spinning beveled collar. Furnished with retaining clip and two spacers. Available in three colors.

Rockwood #474.26D 3-3/4" Long Wall Mount Door Stop Bumper in Satin Chrome Finish. Cast Brass body with DuraFlex Bumper. Uses 3 screws (included) for mounting. For residential or commercial applications. Base: 2-1/2" dia. Projection: 3-3/4".

IDC ER-1200 Flushbolt Extension Rod. 1/4"-20 x 12" Threaded rod with coupler.

IDC OP-1689 Aluminum Offset Pivot Hinge Set. Jackson Type cast aluminum pivots. Comparable Jackson part 689. Choice of two color finishes.

IDC (OP-7002-AL) Aluminum Right Hand Offset Pivot Hinge Set. Kawneer Type cast aluminum pivots. Comparable Kawneer part : 50-324: 50-323; 50-320 and 50-321. Choice of three color finishes.

IDC Frame Portion Top Pivot (400-PF-1) With Drilled and Countersunk mounting holes. For use in Center-Hung door applications utilizing a concealed floor mounted door closer. Door removal or clearance adjustment is accomplished by raising or lowering the...

IDC DH-1820-H Storefront Aluminum Door Hook Style Latch Deadlock. 1-1/8" BACK SET. Bolt 13/16" throw, made of 5 ply laminated steel with a hardened roller pin in a case hardened center ply for maximum security. Lock accepts standard 1-5/32" mortise key...

Rockwood #570.10B Brass Dust Proof Strike in Oil Rubbed Bronze Finish. Designed for use with manual and automatic flush bolts. Removable face plate for use with thresholds. Adjustable height for carpeted areas. Face Plate: 1-3/8" x 2-7/8" Barrel:...

IDC DH-6000 Heavy Duty Kick Down Door Holder. Zinc alloy construction. Non-marking rubber tip. 7" Body Height. Choice of two colors.

IDC FB-1204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FP-1851 Flat Style Faceplate. Fits IDC DT-1850 and others long throw deadlocks. Available in three colors. 1" x 6-7/8". Choice of two colors.