Swinging Door Hardware

IDC DH-1820-H Storefront Aluminum Door Hook Style Latch Deadlock. 31/32" BACK SET. Bolt 13/16" throw, made of 5 ply laminated steel with a hardened roller pin in a case hardened center ply for maximum security. Lock accepts standard 1-5/32" mortise key...

IDC DC-2001 Storefront Door Mortise Dummy Lock Cylinder. Available in three colors. 7/8" Length cylinder 1-5/32" diameter. No Keyway or cam. 3/16" Standard cylinder ring.

Storefront Door Mortise Thumbturn Cylinder (TZ-3001-1195-AL-S.) Available in three colors. 1" Length zinc cylinder 1-5/32" Diameter. AR MS-Type cam. 3/16" Standard cylinder ring...

IDC (OP-2800-DU) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

T5 Back to back fastener for International Door Closures Pull and Push bars

IDC (FG-1200) Storefront Door Standard Nylon Flushbolt Guide. For FB1200 and FB 2200 series, and many manufactures flush bolts.

IDC FB-1202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC LI-4089 Commercial Aluminum Storefront Door Lock Indicator Set. For use with DH-1820 and DT-1850 type Deadlocks. LOCKED in red and OPEN in green letters on white background. Includes adhesive backed HS-4089 Header Sign "THIS DOOR MUST REMAIN UNLOCKED...

IDC DH-6000-TIP Heavy Duty Kick Down Door Holder Replacement Tip. Non-marking black rubber tip. For DP-6000 kick down holder.

IDC (OP-2700) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC (OP-3102) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three color finishes.

IDC FP-1853-AL Radius Style Faceplate With Weatherstripping. Fits IDC DT-1850 and others long throw deadlocks. 1" x 6-7/8". Available in three colors.

IDC HB-4085 Header Bolt Set. Inactive leaf lock when used with basic Long Throw Deadlock in active leaf. 5/8" Throw expanding bolt. Unit complete with rod guide and header strike. Minor adjustments can be made after installation. For doors 30-1/2" to 50"...

Rockwood #471.26D 3" Tall Floor Mount Door Stop Bumper in Satin Chrome Finish. Cast Brass body with DuraFlex Bumper. Uses 1 screw and 1 lag bolt (included) for mounting. For residential or commercial applications. Base: 2-1/2" dia. Height: 3".

IDC HL-4560 Right Hand Aluminum Storefront Door Lever Handle. For use with DL-4510 type Latch Lock. Complete with field reversible (left or right) cam plug. Choice of three colors.

IDC FB-1206 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 3/16" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with...