Swinging Door Hardware

Rockwood #471.10B 3" Tall Floor Mount Door Stop Bumper in Oil Rubbed Bronze Finish. Cast Brass body with DuraFlex Bumper. Uses 1 screw and 1 lag bolt (included) for mounting. For residential or commercial applications. Base: 2-1/2" dia. Height: 3".

Rockwood #474.10B 3-3/4" Long Wall Mount Door Stop Bumper in Oil Rubbed Bronze Finish. Cast Brass body with DuraFlex Bumper. Uses 3 screws (included) for mounting. For residential or commercial applications. Base: 2-1/2" dia. Projection: 3-3/4".

Features, Advantages, and Benefits 1/2" x 1/2" x 6" Long Use with Continuous Header Converts a Double Acting Door into a Single Acting One Way Door with a Positive Stop

Rockwood #458.CRM Kick Down Door Stop in Bright Chrome Finish. 4" Throw kicks down to hold door open. Cast Zinc body with DuraFlex Bumper. 3 Hole mounting. The replaceable DuraFlex bumper provides a reliable grip on the floor. Great for residential...

Features, Advantages, and Benefits 1/2" x 1/2" x 2" Long Use with Continuous Header Converts a Double Acting Door into a Single Acting One Way Door with a Positive Stop

IDC (SC-4520) Latch Strike for use with DL-4510. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Offset door and frame. Non-handed Stainless Steel strike for left or right hand installation.

The .375" thick, solid cast brass 325 Latch Protector, which is used with a mortise or cylindrical lock to protect door latches, features a clean aesthetic design with no exposed fasteners.

Rockwood #440.10B Door Stop Low Dome Bumper in Oil Rubbed Bronze Finish. Solid Cast Brass body with DuraFlex Bumper. Mounts to floor to protect wall and door from damage. For residential or commercial applications. Base: 1/4" high x 1-7/8" dia...

Rockwood #442.26D Door Stop Low Dome Bumper in Satin Chrome Finish. Solid Cast Brass body with DuraFlex Bumper. Mounts to floor to protect wall and door from damage. For residential or commercial applications. Base: 7/16" high x 1-7/8" dia. Overall...

The .105" thick 321 Latch Protector is for use with a mortise lock to protect the door latch.

Rockwood #458.BRZ Kick Down Door Stop in Dull Bronze Finish. 4" Throw kicks down to hold door open. Cast Zinc body with DuraFlex Bumper. 3 Hole mounting. The replaceable DuraFlex bumper provides a reliable grip on the floor. Great for residential and...

Features, Advantages, and Benefits 1/2" x 1/2" x 6" Long Use with Continuous Header Converts a Double Acting Door into a Single Acting One Way Door with a Positive Stop

IDC (OP-5001) Aluminum Left Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three color finishes.

IDC SC-4540-2 Deadlatch Strike Set. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Center Hung door and 4" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC (SC-4545-1) Single hole 4.5 long lip strike set. Used for the new installation of a new a new DL-4510 type Deadlatch Lock in an Center Hung door and 4-1/2" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC Floor Dress Plate (400-PD). This cover plate is designed for use with IDC 400-PF1 frame potion pivot. DRESS COVER, SERIES 4400