Swinging Door Hardware

Rockwood #461B.BLACK Replacement Black DuraFlex Bumper. Fits Rockwood Models #;458,460,461 Kick down door holders. Black color.

IDC FP-4513 Radius Face Plate With Mohair Weatherstripping. Fits DL-4510 style Deadlatch. 1" x 6 7/8". Available in two colors.

IDC PH-4524 Aluminum Storefront Door Pull To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC HB-4086 Header Bolt Set. Inactive leaf lock when used with basic Long Throw Deadlock in active leaf. 5/8" Throw expanding bolt. Unit complete with rod guide and header strike. Minor adjustments can be made after installation. For doors 55-5/8" to...

Rockwood #570.26D Brass Dust Proof Strike in Satin Chrome Finish. Designed for use with manual and automatic flush bolts. Removable face plate for use with thresholds. Adjustable height for carpeted areas. Face Plate: 1-3/8" x 2-7/8" Barrel: 7/8" dia...

Rockwood #461.26D Commercial Kick Down Door Stop in Satin Chrome Finish. 3-5/8" Throw kicks down to hold door open. The unique assembly design conceals the axle in the base. Solid Cast Brass body with DuraFlex Bumper. 4 Hole mounting. The replaceable...

IDC FP-4511 Flat Style Face Plate. Fits DL-4510 style Deadlatch. 1" x 6 7/8". Available in two colors.

IDC (OP-5002-AL) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of two color finishes.

IDC PH-4523 Aluminum Storefront Door Pull To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC SS-4510 Strike. Mounting holes press formed countersunk. Non-handed Stainless Steel strike for left or right hand installation.

IDC (TB-4015) Threshold Bolt Kit. Unit complete for attachment to basic Deadlock to provide two-point security. 3/8" Hexagon hardened steel bolt. 11/16" Bolt throw. For doors with cylinder height up to 53-1/2". Threaded rod can be cut for cylinder...

IDC Storefront Aluminum Door Long Throw Bolt Deadlock. 1-1/2" BACK SET. Bolt 1-3/8" throw, made of 5 ply laminated steel with a hardened roller pin in a case hardened center ply for maximum security. Lock accepts standard 1-5/32" mortise key or thumbturn...

Rockwood #446.26D Modern Style Universal Door Stop in Satin Chrome Finish. Brass body with DuraFlex Bumper. The 2 part (screw apart) body allows for concealed fastening and easy replacement of the bumper. The 2 sets of installation fasteners allows...

IDC SC-4540-1 Deadlatch Strike Set. Used for the new installation of a new a new DL-4510 type Deadlatch Lock in an Center Hung door and 4" frame. Non-handed Stainless Steel strike for left or right hand installation.

Features, Advantages, and Benefits 1/2" x 1/2" x 6" Long Use with Continuous Header Converts a Double Acting Door into a Single Acting One Way Door with a Positive Stop

IDC DH-1820-S Storefront Aluminum Door Short Throw Bolt Deadlock. 1-1/8" BACK SET. Bolt 13/16" throw, made of 5 ply laminated steel with a hardened roller pin in a case hardened center ply for maximum security. Lock accepts standard 1-5/32" mortise key...