Swinging Door Hardware

IDC FP-1821 Flat Style Face Plate. Fits DH-1820-H hook latch and DH-1820-S short throw style deadlocks. 1" x 6 7/8". Choice of three colors.

IDC FP-4511 Flat Style Face Plate. Fits DL-4510 style Deadlatch. 1" x 6 7/8". Available in three colors.

IDC SS-4510 Strike. Mounting holes press formed countersunk. Non-handed Stainless Steel strike for left or right hand installation.

IDC HB-4015-N Special Header Bolt Set. Header Bolt set is standard for 84" doors with cylinder heights of not less than 33".

IDC PH-4522 Aluminum Storefront Door Push To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4521 Aluminum Storefront Door Push To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4524 Aluminum Storefront Door Pull To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4523 Aluminum Storefront Door Pull To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC (OP-7002-AL) Aluminum Right Hand Offset Pivot Hinge Set. Kawneer Type cast aluminum pivots. Comparable Kawneer part : 50-324: 50-323; 50-320 and 50-321. Choice of three color finishes.

IDC (OP-6002-AL) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 7/64" recessed from the frame face. 1-1/4" mounting hole spacing on back side of pivot door portions. Choice of three color...

IDC (OP-5002-AL) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of two color finishes.

IDC (OP-4002-DU) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 1-1/4" mounting hole spacing on back side of pivot door portions.

IDC (OP-3102-DU) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three color...

IDC (OP-3002-DU) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC (OP-7001-BK)(OP-7001-DU) Aluminum Left Hand Offset Pivot Hinge Set. Kawneer Type cast aluminum pivots. Comparable Kawneer part : 50-324: 50-323; 50-320 and 50-321. Choice of two color finishes.

IDC (OP-6001-DU) Aluminum Left Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 7/64" recessed from the frame face. 1-1/4" mounting hole spacing on back side of pivot door portions. Choice of three color...

IDC (OP-5001-DU) Aluminum Left Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three color...

IDC (OP-4001-DU) Aluminum Left Hand 3/4"Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 1-1/4" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC (OP-3101-AL) Aluminum Left Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three color...

IDC (OP-3001-DU) Aluminum Left Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 13/16" mounting hole spacing on back side of pivot door portions.