Glass Shower Hardware

Newbury Series, Chrome plated wall mount frameless shower door hinge with Full back plate. This jumbo version of our standard plaza hinge provides the maximum rated capacity of any shower door hinge on the market. The short back plate is preferred on...

Chrome Plated 1-1/8" Style Washers. These washers add a stylish look to our 3/4" diameter back to back shower door handles. These decorative solid brass washers also serve to cover any hole defects in glass. 1/8" Thick x 1-1/8" Diameter. Pack of Four...

American Classic Series, 135 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees...

Brushed Nickel Anodized Aluminum Standard Shallow 1/2" U Channel. This low profile U Channel is designed for use as a bottom or side support for 1/2" glass panels. Aluminum U Channel is most commonly used in frameless glass shower installations. 95" Long.

Chocolate Brown Finish, Single-sided Cylinder Style Shower Door Knob. Knob measures 3/4" in diameter and stand 1-1/4" from the door surface. The end cap stands 5/32" from the door surface. Solid Brass construction. These shower door knobs include...

American Classic Series, 180 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees...

Kingston Beveled Series, Chocolate Brown Finish wall mount frameless shower door hinge with offset back plate. This jumbo version of our standard rotunda hinge provides the maximum rated capacity of any shower door hinge on the market. Solid Brass...

Deluxe, 135 Degree corner shower door header brackets. Solid Brass construction. These brackets slide into each end of the shower header and are secured into the slot with the attached Allen screws.

19mm Diameter Round Tubing Back To Back  Shower Door Pull Handle Without  Washers 3/4"(19mm) Diameter Brass Tubing Designed for 1/4"(6mm) and 1/2"(12mm)Glass 8"-30" Center Spacing All Available Available in Brushed Nickel, Chrome, Matte Black...

American Classic Series, wall mount frameless shower door hinge with short back plate. The short back plate is preferred on installations where the least amount of exposed metal is desired. Solid Brass construction with all moving parts (pins and...

Cambridge Series, Chocolate Brown finish wall mount frameless shower door hinge with short back plate. The short back plate is preferred on installations where the least amount of exposed metal is desired. Solid Brass construction with all moving...

Kingston Beveled Series, Chocolate Brown Finish wall mount frameless shower door hinge with full back plate. This jumbo version of our standard rotunda hinge provides the maximum rated capacity of any shower door hinge on the market. Solid Brass...

Oil Rubbed Bronze Finish Frameless Shower Door Half-Round Aluminum Threshold. The low profile contour shape is gentle on the feet while providing a good dam to allow water to drain back into the shower floor. It is normally mounted directly under the...

Plaza Series 4" x 2" glass to glass mount operable transom pivoting clip. These square edge clips are designed to rotate a movable transom glass off an inline fixed glass panel for frameless shower applications. Operable transom glass allows for the...

Plaza Series header (top) mount frameless shower door pivot hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees of...

Deluxe, 90 Degree corner shower door header brackets. Solid Brass construction. These brackets slide into each end of the shower header and are secured into the slot with the attached Allen screws.

American Classic Series, Chocolate Brown finish wall mount frameless shower door hinge with short back plate. The short back plate is preferred on installations where the least amount of exposed metal is desired. Solid Brass construction with all ...

Size 2-1/8"(54mm)Wide X 1"(25mm) Deep Designed for 5/16"(8mm) and 1/2"(12mm)Glass Available in Brushed Nickel, Satin Brass, Chrome, and Matte Black.

American Classic Series, Chocolate Brown finish 135 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are...

Chocolate Brown Finish, Back to Back Cylinder Style Shower Door Knobs with plastic cushion. The thin clear plastic sleeve on the interior knob is ideal for use on sliding bypass shower doors to protect the knob and glass surfaces. Knobs measures 3/4"...