DFI Glass Defender Kit

Product Description

Restore and protect your glass surfaces with DFI’s Glass Defender™ shower glass treatment kit. Created as an all-in-one package, the kit includes everything you need to remove unwanted stains off your glass and then protect it with a water repellent coating. The application process is easy and can be applied to a wide range of surfaces, including shower doors, mirrors, glass railings, windows, and more.

As a shower glass treatment that helps prevent water spots, the Glass Defender™ Kit is notable for being a hydrophobic shower glass treatment, repelling hard water and keeping it from sticking and leaving hard water stains. Cleaners for glass showers are a dime a dozen, but the combination of cleaning, repairing, and protecting shower and other glass surfaces is what makes this kit the best glass shower door treatment.

Not only does the Glass Defender™ Kit clean glass, but it also keeps the glass from getting dirty in the first place. You’ll find yourself using a lot fewer chemical cleaners when you start using the best hydrophobic shower glass treatment.

Features and Benefits

• Invisible protective glass coating
• Shower glass water repellent treatment
• Covers up to 110 sq. ft. (2 avg. shower doors)
• Repels hard water, soap scum, and more
• Cuts cleaning time and effort
• Removes and prevents hard water stains
• Helps prevent stains and etching
• Eco-friendly; eliminates chemical cleaners
• No cure time; coating instantly dries
• Easy application process
• The best treatment for shower glass doors

What's Included

• Three (3) Restoration Powder™ NanoPax® – Use to remove hard water stains, soap scum, and more (product coverage varies on extent of damage).
• One (1) Clear-Fusion™ V Bottle (59 mL / 2 oz.) – An optically clear, water repellent coating that protects glass and makes it easier to clean (each bottle treats approximately 110 sq. ft. of glass).
• One (1) White Scrubber Pad – Use to clean glass with Restoration Powder™.
• One (1) Microfiber Towel – Use to polish glass when applying Clear-Fusion™ V.

Application Instructions

Watch our application video or download the PDF guide.

1. Start by wetting the glass and using the white scrubber pad with Restoration Powder™ to remove any stains. If stains persist, use more pressure.
2. Once thoroughly clean and dry, apply Clear-Fusion™ V protective coating in a well-ventilated area. Spray the coating as needed and wipe with the microfiber towel using firm circular, overlapping motions, going over the entire area at least twice.
3. To test the application, spray the glass with water and look for uniform water beads. For areas that are not beading up uniformly, reapply Clear-Fusion™ V as needed.

Important: When applying Clear-Fusion™ V to the glass, we recommend approximately four (4) full sprays for each square foot of glass being treated.

Important: Make sure the microfiber towel is completely dry when wiping in the coating.

Important: In less-ventilated areas, apply Clear-Fusion™ V protective coating in small sections.

Care Instructions

Download the PDF guide or read the care instructions below.

Shower Glass Enclosures
For best results, rinse the shower glass after each use and wipe down any remaining droplets. You may also towel dry the surface or use a squeegee. Once a month, wet the shower glass and use a nylon body puff to go over the surface until clean and smooth. Then rinse and dry the glass.

Glass Railings/Windows
Glass railings and windows can be cleaned with any liquid dish soap and water, along with a non-abrasive sponge or microfiber towel and a squeegee. Please note, in situations where surfaces are continually exposed to hard water, sprinklers, pool cleaners, and other forms of artificially-made water contact, a simple maintenance routine is recommended to keep deposits from developing on the coating over time.