Swinging Door Hardware

IDC CZ-1001 Pair Storefront Door Zinc Mortise Key Cylinder Locks. 1" Length 5 pin cylinder 1-5/32" diameter. AR MS-Type cam. Body available in three colors. Core face and Key US 26D finish. Standard Schlage "C" Keyway. 3/16" Standard cylinder ring.

IDC CG 4043 Storefront Aluminum Door Mortise Key Cylinder Lock Guard. For standard face 5 pin mortise lock cylinder. Hardened steel security ring. Free-spinning beveled collar. Furnished with retaining clip and two spacers. Available in three colors.

IDC DC-2001 Storefront Door Mortise Dummy Lock Cylinder. Available in three colors. 7/8" Length cylinder 1-5/32" diameter. No Keyway or cam. 3/16" Standard cylinder ring.

IDC (OP-2700) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC LI-4089 Commercial Aluminum Storefront Door Lock Indicator Set. For use with DH-1820 and DT-1850 type Deadlocks. LOCKED in red and OPEN in green letters on white background. Includes adhesive backed HS-4089 Header Sign "THIS DOOR MUST REMAIN UNLOCKED...

IDC HL-4560 Right Hand Aluminum Storefront Door Lever Handle. For use with DL-4510 type Latch Lock. Complete with field reversible (left or right) cam plug. Choice of three colors.

IDC HL-4560 Left Hand Aluminum Storefront Door Lever Handle. For use with DL-4510 type Latch Lock. Complete with field reversible (left or right) cam plug. Choice of three colors.

IDC FB-1204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC (RZ-1003) Storefront Door Mortise Rim Key Cylinder Lock. 5 Pin cylinder with Schlage "C" Keyway. Core face and key US 26D finish. Low profile cylinder ring and adaptor plate. 1-7/8" Break-away screws and 1-1/4" Break-away spindle standard. Available...

IDC (IP-2202) Aluminum 3/4" Offset Right Hand Intermediate Pivot Set. Slotted style for use with aluminum doors and frames. Choice of three colors.

IDC IP-1902 Aluminum 3/4" Offset Right Hand Intermediate Pivot Set. Mortise style for use with aluminum doors and frames. Choice of three colors.

IDC TZ-3001 Storefront Door Mortise Thumbturn Cylinder. Available in three colors. 1" Length zinc cylinder 1-5/32" Diameter. AR MS-Type cam. Thumbturn US 26D finish. 3/16" Standard cylinder ring.