Swinging Door Hardware

IDC (FG-1200) Storefront Door Standard Nylon Flushbolt Guide. For FB1200 and FB 2200 series, and many manufactures flush bolts.

IDC PH-4522 Aluminum Storefront Door Push To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4521 Aluminum Storefront Door Push To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4524 Aluminum Storefront Door Pull To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4523 Aluminum Storefront Door Pull To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC (OP-2800-DU) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC OP-1689 Aluminum Offset Pivot Hinge Set. Jackson Type cast aluminum pivots. Comparable Jackson part 689. Choice of two color finishes.

IDC DH-6000 Heavy Duty Kick Down Door Holder. Zinc alloy construction. Non-marking rubber tip. 7" Body Height. Choice of two colors.

IDC FB-1206 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 3/16" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with...

IDC FB-2202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-1202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-2204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...