Swinging Door Hardware

IDC (OP-2800-DU) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC (OP-2700) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits flush with the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC OP-1689 Aluminum Offset Pivot Hinge Set. Jackson Type cast aluminum pivots. Comparable Jackson part 689. Choice of two color finishes.

IDC LI-4089 Commercial Aluminum Storefront Door Lock Indicator Set. For use with DH-1820 and DT-1850 type Deadlocks. LOCKED in red and OPEN in green letters on white background. Includes adhesive backed HS-4089 Header Sign "THIS DOOR MUST REMAIN UNLOCKED...

IDC HL-4560 Right Hand Aluminum Storefront Door Lever Handle. For use with DL-4510 type Latch Lock. Complete with field reversible (left or right) cam plug. Choice of three colors.

IDC HL-4560 Left Hand Aluminum Storefront Door Lever Handle. For use with DL-4510 type Latch Lock. Complete with field reversible (left or right) cam plug. Choice of three colors.

IDC ER-1200 Flushbolt Extension Rod. 1/4"-20 x 12" Threaded rod with coupler.

IDC FB-1206 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 3/16" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with...

IDC FB-2202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-1202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-2204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-1204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC (SC-4520) Latch Strike for use with DL-4510. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Offset door and frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC SC-4510 Deadlatch Strike Set. Used for the new installation of a new DL-4510 type Deadlatch Lock in an Offset door and frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC (SC-4545-2) Double hole 4.5 long lip strike set. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Center Hung door and 4-1/2" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC (SC-4545-1) Single hole 4.5 long lip strike set. Used for the new installation of a new a new DL-4510 type Deadlatch Lock in an Center Hung door and 4-1/2" frame. Non-handed Stainless Steel strike for left or right hand installation.