Swinging Door Hardware

IDC PP-1000-9-33 Single Bend Push Bar And Offset Pull Combination for aluminum/glass commercial entrance doors. Constructed from 1" diameter solid aluminum. Mounting hardware included (Type 5 back to back concealed for joining ends and Type 1 for free...

IDC (PP-1000-12-33) Single Bend Push Bar And Offset Pull Combination for aluminum/glass commercial entrance doors. Constructed from 1" diameter solid aluminum. Mounting hardware included (Type 5 back to back concealed for joining ends and Type 1 for free...

IDC (PP-1000-10-33) Single Bend Push Bar And Offset Pull Combination for aluminum/glass commercial entrance doors. Constructed from 1" diameter solid aluminum. Mounting hardware included (Type 5 back to back concealed for joining ends and Type 1 for free...

IDC (PP-2000-9-33) Double Bend Push Bar And Offset Pull Combination for aluminum/glass commercial entrance doors. Constructed from 1" diameter solid aluminum. Mounting hardware included- Type 5 back to back concealed for joining ends and choice of Type 1...

IDC (PP-2000-12-33) Double Bend Push Bar And Offset Pull Combination for aluminum/glass commercial entrance doors. Constructed from 1" diameter solid aluminum. Mounting hardware included- Type 5 back to back concealed for joining ends and choice of Type...

IDC PP-2000-10-33 Double Bend Push Bar And Offset Pull Combination for aluminum/glass commercial entrance doors. Constructed from 1" diameter solid aluminum. Mounting hardware included- Type 5 back to back concealed for joining ends and choice of Type 1...

IDC PH-4522 Aluminum Storefront Door Push To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4521 Aluminum Storefront Door Push To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4524 Aluminum Storefront Door Pull To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4523 Aluminum Storefront Door Pull To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC (OP-2800-DU) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC OP-1689 Aluminum Offset Pivot Hinge Set. Jackson Type cast aluminum pivots. Comparable Jackson part 689. Choice of two color finishes.

IDC DH-6000 Heavy Duty Kick Down Door Holder. Zinc alloy construction. Non-marking rubber tip. 7" Body Height. Choice of two colors.

IDC FB-1206 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 3/16" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with...

IDC FB-2202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-1202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-2204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC (PH-4000-2-9) Offset Pull Handle Set for aluminum/glass commercial entrance doors. 9" Center to Center mounting. Constructed from 1" diameter solid aluminum. 3 1/4" Offset and projection. Back To Back concealed mounting hardware included. Available...

IDC (PH-4000-9) Offset Pull for aluminum/glass commercial entrance doors. 9" Center to Center mounting. Constructed from 1" diameter solid aluminum. 3 1/4" Offset and projection. Mounting hardware included. Available in Aluminum and Bronze/Black finishes.

IDC (PH-4000-2-12) Offset Pull Handle Set for aluminum/glass commercial entrance doors. 12" Center to Center mounting. Constructed from 1" diameter solid aluminum. 3 1/4" Offset and projection. Back To Back concealed mounting hardware included. Available...