Glass Shower Hardware

Brushed Nickel Anodized Aluminum Standard Shallow 3/8" U Channel. This low profile U Channel is designed for use as a bottom or side support for 3/8" glass panels. Aluminum U Channel is most commonly used in frameless glass shower installations. 95" Long.

Cambridge Series, Brushed Nickel finish wall mount frameless shower door hinge with offset back plate. The offset back plate provides a cleaner sight line on the shower exterior. Solid Brass construction with all moving parts (pins and springs) in...

Square 6" back to back shower door pull handles.The square design make this handle the Ideal choice to match our Plaza series square cornered hinges. Fabricated from heavy wall brass tubing. These shower door handles include clear plastic handle end...

Cambridge Series, 180 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These beveled edge shower door hinges are self-centering when within 15 degrees of...

Square 8" back to back shower door pull handles.The square design make this handle the Ideal choice to match our Plaza series square cornered hinges  Fabricated from heavy wall brass tubing. These shower door handles include clear plastic handle end...

Brushed Nickel Anodized Aluminum Deep 1/2" U Channel. This Deep U Channel is designed for use as a top, bottom or side support for 1/2" glass panels. Aluminum U Channel is most commonly used in frameless glass shower installations. 47-7/8" Long.

Tubular 24" Single-sided shower glass towel bar. The low profile end caps are ideal for use on bypass sliding doors. Fabricated from 3/4" Diameter heavy wall brass tubing. These shower door towel bars include clear plastic handle end washers as well as...

Designed for 5/16"(8mm) to 1/2"(12mm)Glass Solid Forged Brass Construction Size:2"(51mm) Wide*2"(51mm) High 90 Degree Glass to Wall Available in Brushed Nickel, Satin Brass, Chrome, and Matte Black.

Rotunda Series 2" x 2" wall mount operable transom pivoting clip. These square edge clips are designed to rotate a movable transom glass off a wall for frameless shower applications. Solid Brass construction. For use with 3/8" - 1/2" Tempered Safety...

Single-sided Cylinder Style Shower Door Knob. Knob measures 3/4" in diameter and stand 1-1/4" from the door surface. The end cap stands 5/32" from the door surface. Solid Brass construction. These shower door knobs include clear plastic handle end...

Brushed Nickel Aluminum Deep 1/4" U Channel. This Deep U Channel is designed for use as a top, bottom or side support for glass panels. Aluminum U Channel is most commonly used in frameless glass shower installations. 95" Long.

Brushed Nickel Finish Frameless Shower Door Half-Round Aluminum Threshold. The low profile contour shape is gentle on the feet while providing a good dam to allow water to drain back into the shower floor. It is normally mounted directly under the shower...

Cambridge Series, wall mount frameless shower door hinge with short back plate. The short back plate is preferred on installations where the least amount of exposed metal is desired. Solid Brass construction with all moving parts (pins and springs) in...

Kingston Series wall mount frameless shower door hinge with short back plate. This jumbo version of our standard plaza hinge provides the maximum rated capacity of any shower door hinge on the market. The short back plate is preferred on installations...

Solid Brass Rounded Interior Shelf Clamp. Designed to be used to secure a shelf for lightweight articles. Clamps should be secured to wall with screws (included) in studs, or with Molly-type anchors. A Nylon tip brass set screw secure the glass. Maximum...

Kingston Series wall mount frameless shower door hinge with offset back plate. This jumbo version of our standard plaza hinge provides the maximum rated capacity of any shower door hinge on the market. Solid Brass construction with all moving parts (pins...

Routunda Series 4" x 2" glass to glass mount operable transom pivoting clip. These beveled edge clips are designed to rotate a movable transom glass off an inline fixed glass panel for frameless shower applications. Operable transom glass allows for the...

Brushed Nickel Anodized Aluminum Standard Shallow 1/2" U Channel. This low profile U Channel is designed for use as a bottom or side support for 1/2" glass panels. Aluminum U Channel is most commonly used in frameless glass shower installations. 47-7/8"...

American Classic Series, 180 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees...

Size 2-1/8"(54mm)Wide X 1"(25mm) Deep Designed for 5/16"(8mm) and 1/2"(12mm) Glass Available in Brushed Nickel, Satin Brass, Chrome, and Matte Black.