International Door Closer

IDC FB-2204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-1204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC (SC-4520) Latch Strike for use with DL-4510. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Offset door and frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC SC-4510 Deadlatch Strike Set. Used for the new installation of a new DL-4510 type Deadlatch Lock in an Offset door and frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC (SC-4545-2) Double hole 4.5 long lip strike set. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Center Hung door and 4-1/2" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC (SC-4545-1) Single hole 4.5 long lip strike set. Used for the new installation of a new a new DL-4510 type Deadlatch Lock in an Center Hung door and 4-1/2" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC SC-4540-2 Deadlatch Strike Set. Used when replacing a MS type lock with a new DL-4510 type Deadlatch Lock in an Center Hung door and 4" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC SC-4540-1 Deadlatch Strike Set. Used for the new installation of a new a new DL-4510 type Deadlatch Lock in an Center Hung door and 4" frame. Non-handed Stainless Steel strike for left or right hand installation.

IDC (RZ-1003) Storefront Door Mortise Rim Key Cylinder Lock. 5 Pin cylinder with Schlage "C" Keyway. Core face and key US 26D finish. Low profile cylinder ring and adaptor plate. 1-7/8" Break-away screws and 1-1/4" Break-away spindle standard. Available...

IDC IP-1902 Aluminum 3/4" Offset Right Hand Intermediate Pivot Set. Mortise style for use with aluminum doors and frames. Choice of three colors.

IDC (IP-1901) Aluminum 3/4" Offset Left Hand Intermediate Pivot Set. Mortise style for use with aluminum doors and frames. Choice of three colors.

IDC DH-6000-TIP Heavy Duty Kick Down Door Holder Replacement Tip. Non-marking black rubber tip. For DP-6000 kick down holder.

IDC D313 (ADA) Adjustable Spring Tension Overhead Concealed Closer Body Only for exterior/interior doors. Adjusts from 5.5 lbs opening force to medium spring tension. This is the same quality IDC Door closer that is included in our complete closer...

IDC D311 (ADA) Adjustable Spring Tension Overhead Concealed Closer Body Only for exterior/interior doors. Adjusts from 5.5 lbs opening force to medium spring tension. This is the same quality IDC Door closer that is included in our complete closer...

IDC D310 (ADA) Adjustable Spring Tension Overhead Concealed Closer Body Only for exterior/interior doors. Adjusts from 5.5 lbs opening force to medium spring tension. This is the same quality IDC Door closer that is included in our complete closer...

IDC 521-921 Regular Forearm For Surface Mount Door Closer. Fits all models of IDC Series 9000 closers.