Pemko 271A36 5" x 1/4" Mill Finish Aluminum Saddle Threshold 36" Long. Fluted top extruded aluminum threshold manufactured from 6063-T6 tempered aluminum. Designed for use in exterior or interior openings. Suitable for commercial or residential use...

Pemko S771D7 Adhesive-backed High Temperature Silicone Meeting Stile Gasket. The S771 astragal/meeting stile seal can be installed on virtually any pair of doors where sound attenuation is required. This products seals the opening to prevent heat loss,...

Pemko S88BL17 Adhesive-backed High Temperature Silicone Bulb Seal Gasket. Designed to be installed on the perimeter of a door opening to slow/prohibit the passage of smoke, fire, weather, sound and dirt. Unaffected by sunlight, ozone and ultraviolet rays...

IDC Series 6100-6300 Panic Hardware Replacement Cross Bar. 48" Long will fit doors 37" - 48" Wide (cut bar to fit).

Rockwood #474.10B 3-3/4" Long Wall Mount Door Stop Bumper in Oil Rubbed Bronze Finish. Cast Brass body with DuraFlex Bumper. Uses 3 screws (included) for mounting. For residential or commercial applications. Base: 2-1/2" dia. Projection: 3-3/4".

The .105" thick 321 Latch Protector is for use with a mortise lock to protect the door latch.

Rockwood #458.BRZ Kick Down Door Stop in Dull Bronze Finish. 4" Throw kicks down to hold door open. Cast Zinc body with DuraFlex Bumper. 3 Hole mounting. The replaceable DuraFlex bumper provides a reliable grip on the floor. Great for residential and...

Features, Advantages, and Benefits 1/2" x 1/2" x 6" Long Use with Continuous Header Converts a Double Acting Door into a Single Acting One Way Door with a Positive Stop

IDC (117FMD) Heavy Duty 83" Concealed continuous geared hinge. Constructed from extruded 6063-T6 aluminum alloy with a dark bronze anodized finish. All IDC continuous aluminum geared hinges have self lubricating Polyacetal thrust bearings for smooth and...

IDC (417FSD) Heavy Duty 95" full surface continuous geared hinge for narrow frames. Constructed from extruded 6063-T6 aluminum alloy with a dark bronze anodized finish. All IDC continuous aluminum geared hinges have self lubricating Polyacetal thrust...

IDC D520 Main Arm For Surface Mount Door Closer. Fits all models of IDC Series 5000 closers.

IDC 5510F-48 Fire Rated Push Bar Rim Mount Panic Hardware. Designed for use with wide stile (minimum 3-1/2") Fire Labeled 1-3/4" Thick doors. Non-Handed and Reversible UL and ULC Listed Fire Exit Hardware. Fits single doors 37" - 48" Wide (cut bar to...

IDC 5510F-48 Fire Rated Push Bar Rim Mount Panic Hardware. With Exterior Locking Lever Trim. Designed for use with wide stile (minimum 3-1/2") Fire Labeled 1-3/4" Thick doors. Non-Handed and Reversible UL and ULC Listed Fire Exit Hardware. Fits single...

IDC (5510S-US20A-36) Rim Mount Push Bar Hardware with Exterior Locking Lever Trim. Designed for use with wide stile (minimum 3-1/2") aluminum, hollow metal or wood 1-3/4" Thick doors. Non-Handed and Reversible UL and ULC Listed Panic Hardware. Fits...

IDC (5510S-US20A-48) Panic Exit Device Rim Mount Push Bar Hardware with Exterior Rose Lever Locking Trim. Designed for use with wide stile (minimum 3-1/2") aluminum, hollow metal or wood 1-3/4" Thick doors. Non-Handed and Reversible UL and ULC Listed...

IDC (5510S-US20A-48) Panic Exit Device Rim Mount Push Bar Hardware with Exterior Rose Lever Locking Trim. Designed for use with wide stile (minimum 3-1/2") aluminum, hollow metal or wood 1-3/4" Thick doors. Non-Handed and Reversible UL and ULC Listed...

IDC (5530S-US28A-36) Standard Commercial Surface Vertical Rod Mount Panic Hardware With Exterior Locking Pull Plate. Designed for use with wide stile (minimum 3-1/2") aluminum, hollow metal or wood 1-3/4" Thick doors. Non-Handed and Reversible UL and ULC...

IDC (5530S-US28A-36) Panic Exit Device Surface Vertical Rod Mount Push Bar Hardware with Exterior Locking Lever Trim. Designed for use with wide stile (minimum 3-1/2") aluminum, hollow metal or wood 1-3/4" Thick doors. Non-Handed and Reversible UL and...

IDC 620 Main Arm For Surface Mount Door Closer. Fits all sizes of IDC Series 650-680 closers.

IDC (7301-G1-AL-48) Grade 1 Modern Flat Bar Push In Rim Panic Hardware. Complete with outside pull handle. Designed for use with narrow, medium and wide stile aluminum 1-3/4" Thick doors. Can also be used on metal or wood doors with optional (MP-6000)...