Glass Shower Hardware

Kingston Series wall mount frameless shower door hinge with offset back plate. This jumbo version of our standard plaza hinge provides the maximum rated capacity of any shower door hinge on the market. Solid Brass construction with all moving parts (pins...

Solid Brass Rounded Interior Shelf Clamp. Designed to be used to secure a shelf for lightweight articles. Clamps should be secured to wall with screws (included) in studs, or with Molly-type anchors. A Nylon tip brass set screw secure the glass. Maximum...

Routunda Series 4" x 2" glass to glass mount operable transom pivoting clip. These beveled edge clips are designed to rotate a movable transom glass off an inline fixed glass panel for frameless shower applications. Operable transom glass allows for the...

American Classic Series, 180 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees...

Size 2-1/8"(54mm)Wide X 1"(25mm) Deep Designed for 5/16"(8mm) and 1/2"(12mm) Glass Available in Brushed Nickel, Satin Brass, Chrome, and Matte Black.

Brass 135 Degree slip over glass clamp. The clamp is held in place with a set screw in each leg. Designed to aid with the pressure positioned on glass panels in frameless shower applications. Also offers secure positioning of the glass while enabling the...

Chrome Plated, Single-sided Cylinder Style Shower Door Knob. Knob measures 3/4" in diameter and stand 1-1/4" from the door surface. The end cap stands 5/32" from the door surface. Solid Brass construction. These shower door knobs include clear...

Kingston Beveled Series, wall mount frameless shower door hinge with offset back plate. This jumbo version of our standard rotunda hinge provides the maximum rated capacity of any shower door hinge on the market. Solid Brass construction with all moving...

Tubular 18" Single-sided shower glass towel bar. The low profile end caps are ideal for use on bypass sliding doors. Fabricated from 3/4" Diameter heavy wall brass tubing. These shower door towel bars include clear plastic handle end washers as well as...

Chrome Adjustable Shelf Clamps. Designed for use with glass or wood shelves 1/8" to 15/16" (3 to 24 mm) thick and up to 10" (254 mm) protrusion from wall. Recommended use tempered glass when using glass for shelve. Maximum recommended weight per pair...

Chrome Plated 1-1/8" Style Washers. These washers add a stylish look to our 3/4" diameter back to back shower door handles. These decorative solid brass washers also serve to cover any hole defects in glass. 1/8" Thick x 1-1/8" Diameter. Pack of Four...

Plaza Series header (top) mount frameless shower door pivot hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees of...

American Classic Series, 135 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are self-centering when within 15 degrees...

Designed For 1/2"(12mm)GlassSolid Forged Brass ConstructionMatch Stainless Steel Alan Style Clamp Screws (Alan Wrench and Philips Screws included) Available in Brushed Nickel, Chrome, Matte Black and Satin Brass.

Size 2-1/8"(54mm)Wide X 1"(25mm) Deep Designed for 5/16"(8mm) and 1/2"(12mm)Glass Available in Brushed Nickel, Satin Brass, Chrome, and Matte Black.

19mm Diameter Round Tubing Back To Back Shower Door Ladder Pull Handle Without washers. 3/4"(19mm) Diameter Brass Tubing Designed for 1/4"(6mm) and 1/2"(12mm)Glass 8"-30" Center Spacing All Available Available in Brushed Nickel, Chrome, Matte Black and...

Plaza Series 4" x 2" glass to glass mount operable transom pivoting clip. These square edge clips are designed to rotate a movable transom glass off an inline fixed glass panel for frameless shower applications. Operable transom glass allows for the...

Gold Anodized Aluminum 95" Frameless Shower Door Header is solid aluminum alloy. Dual profile design (round or flat with mitered edge) allows for the choice of the facing edge. Shower door headers are designed to give support for glass panels that do not...

19mm Diameter Round Tubing Back To Back   Shower Door Pull Handle Without Washers 3/4"(19mm) Diameter Brass Tubing Designed for 1/4"(6mm) and 1/2"(12mm) Glass 6"-30" Center Spacing All Available Available in Brushed Nickel, Chrome, Matte Black and...

Chrome Plated, Back to Back Cylinder Style Shower Door Knobs with plastic cushion. The thin clear plastic sleeve on the interior knob is ideal for use on sliding bypass shower doors to protect the knob and glass surfaces. Knobs measures 3/4" in...