International Door Closer

IDC 7104-G1-36 Grade 1 Modern Flat Bar Push In Concealed Vertical Rod Panic Hardware. Complete with outside pull handle, locking cylinder and mounting pad. Designed for use with narrow, medium and wide stile aluminum 1-3/4" Thick doors. Non-Handed. UL...

IDC 7101-G1-48 Grade 1 Modern Flat Bar Push In Concealed Vertical Rod Panic Hardware. Designed for use with narrow, medium and wide stile aluminum 1-3/4" Thick doors. Non-Handed. UL Listed. Fits doors 37" - 48" Wide (cut bar to fit) and up to 84" in...

IDC 7101-G1-36 Grade 1 Modern Flat Bar Push In Concealed Vertical Rod Panic Hardware. Designed for use with narrow, medium and wide stile aluminum 1-3/4" Thick doors. Non-Handed. UL Listed. Fits doors 30" - 36" Wide (cut bar to fit) and up to 84" in...

IDC TJB-9000 Top Jamb Mounting Bracket For Surface Mount Door Closer. Designed for mounting closer on top jamb where more mounting surface is needed on the jamb. Fits all models IDC Series 9000 closers.

IDC 9007 Flat Drop Mounting Plate For Surface Mount Door Closer. Designed for mounting closer on doors where more mounting surface is needed on top door stile. Fits all models of IDC Series 9000 closers.

IDC "VO" Type Offset Arm Assembly With Mortise Style Slide-Track for use with overhead concealed closers. Fits doors with 9/16" Deep top rail.

IDC "JO" Type Offset Arm Assembly With Mortise Style Slide-Track for use with overhead concealed closers. Fits doors with 9/16" Deep top rail.

IDC PH-4522 Aluminum Storefront Door Push To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4521 Aluminum Storefront Door Push To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4524 Aluminum Storefront Door Pull To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4523 Aluminum Storefront Door Pull To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC (OP-2800-DU) Aluminum Non Handed 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 1/8" recessed from the frame face. 13/16" mounting hole spacing on back side of pivot door portions. Choice of three colors.

IDC OP-1689 Aluminum Offset Pivot Hinge Set. Jackson Type cast aluminum pivots. Comparable Jackson part 689. Choice of two color finishes.

IDC DH-6000 Heavy Duty Kick Down Door Holder. Zinc alloy construction. Non-marking rubber tip. 7" Body Height. Choice of two colors.

IDC FB-1206 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 3/16" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with...

IDC FB-2202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-1202 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/8" OFFSET with 7/8" backset. Positive "U" joint actuator with 5/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC FB-2204 Flush Bolt for radius face Narrow Stile aluminum doors. 15/16" x 4-1/4" Radius face. 1/4" OFFSET with 7/8" backset. Positive "U" joint actuator with 7/8" THROW. Rod length for 12" Centerline of face installation. Square Nylon Tip with beveled...

IDC (9001-TP) (ADA) Adjustable Spring Surface Mount Door Closer with Back-Check and Delayed Action closing. Fully adjustable spring for sizes 1-6 including 8.5 lbs. exterior and 5 lbs. interior to comply with ADA door requirements. Closing and Latching...

IDC New Style 522 Hold-Open Arm Assembly For Surface Mount Door Closers. Fits all models of IDC Series 9000 closers. Includes Parallel Bracket for optional parallel arm mounting.