Swinging Door Hardware

IDC HB-4085 Header Bolt Set. Inactive leaf lock when used with basic Long Throw Deadlock in active leaf. 5/8" Throw expanding bolt. Unit complete with rod guide and header strike. Minor adjustments can be made after installation. For doors 30-1/2" to 50"...

IDC HB-4087 Header Bolt Set. Inactive leaf lock when used with basic Long Throw Deadlock in active leaf. 5/8" Throw expanding bolt. Unit complete with rod guide and header strike. Minor adjustments can be made after installation. For doors 67" to 89"...

IDC FG-1250 Storefront Door Extended Hole Nylon Flushbolt Guide. For FB1200 and FB 2200 series, and many manufactures flush bolts.

IDC DL-4510 Storefront Aluminum Door Deadlatch Lock. 31/32" BACK SET. Latchbolt 1/2" throw, Chrome plated with Delrin insert for smooth quiet latching. Lock accepts standard 1-5/32" mortise key or thumbturn cylinders with AR MS-Type cam. Key controlled...

IDC DL-4510 Storefront Aluminum Door Deadlatch Lock. 1-1/8" BACK SET. Latchbolt 1/2" throw, Chrome plated with Delrin insert for smooth quiet latching. Lock accepts standard 1-5/32" mortise key or thumbturn cylinders with AR MS-Type cam. Key controlled...

IDC Floor Dress Plate (400-PD). This cover plate is designed for use with IDC 400-PF1 frame potion pivot.

IDC FP-1853-AL Radius Style Faceplate With Weatherstripping. Fits IDC DT-1850 and others long throw deadlocks. 1" x 6-7/8". Available in three colors.

IDC FP-1823-AL Radius Face Plate With Mohair Weatherstripping. Fits DH-1820-H hook latch and DH-1820-S short throw style deadlocks. 1" x 6 7/8". Available in three colors.

IDC FP-4513 Radius Face Plate With Mohair Weatherstripping. Fits DL-4510 style Deadlatch. 1" x 6 7/8". Available in three colors.

IDC FP-1851 Flat Style Faceplate. Fits IDC DT-1850 and others long throw deadlocks. Available in three colors. 1" x 6-7/8". Choice of three colors.

IDC FP-1821 Flat Style Face Plate. Fits DH-1820-H hook latch and DH-1820-S short throw style deadlocks. 1" x 6 7/8". Choice of three colors.

IDC FP-4511 Flat Style Face Plate. Fits DL-4510 style Deadlatch. 1" x 6 7/8". Available in three colors.

IDC SS-4510 Strike. Mounting holes press formed countersunk. Non-handed Stainless Steel strike for left or right hand installation.

IDC HB-4015-N Special Header Bolt Set. Header Bolt set is standard for 84" doors with cylinder heights of not less than 33".

IDC PH-4522 Aluminum Storefront Door Push To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4521 Aluminum Storefront Door Push To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4524 Aluminum Storefront Door Pull To Right Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC PH-4523 Aluminum Storefront Door Pull To Left Paddle Handle. For use with DL-4510 type Latch Lock. Field reversible for opposite hand with Push and Pull plates included. Complete with field reversible (left or right) cam plug. Choice of two colors.

IDC (OP-7002-AL) Aluminum Right Hand Offset Pivot Hinge Set. Kawneer Type cast aluminum pivots. Comparable Kawneer part : 50-324: 50-323; 50-320 and 50-321. Choice of three color finishes.

IDC (OP-6002-AL) Aluminum Right Hand 3/4" Offset Pivot Hinge Set. For use with aluminum doors and frames where the door sits 7/64" recessed from the frame face. 1-1/4" mounting hole spacing on back side of pivot door portions. Choice of three color...