Sika® AnchorFix-2 adhesive anchor system is solvent/styrene free, epoxy acrylate based, and has been specifically formulated as a high performance, two component adhesive anchor system for threaded bars in uncracked concrete.

Usage

As a fast curing anchoring adhesive for all grades of:

• Rebars / reinforcing steel
• Threaded rods
• Bolts and special fastening systems

In the following substrates:

• Concrete
• Solid masonry
• Steel
• Hard natural stone^*
• Solid rock^*

*   These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-2 Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration. 

Advantages

• Fast curing
• Standard guns can be used
• High load capacity
• Drinking Water certified
• Non-sag, even overhead
• Styrene-free epoxy acrylate
• Low wastage
• Fixing close to free edges.
• Versatile range of embedment depths.
• Anchoring without expansion forces.

Packaging

10 fl.oz. (299 ml) cartridge

Color

uniform gray