Rack & Roll Safety Dolly (8-56" Posts, 4-4" Locking Casters)
- Calculated at Checkout
This gives the user the option of using the dolly inside in the low configuration or outside with the wheels mounted to the corners. Locking casters are substituted for the normal casters and a bracket is used to support the fourth hole of the caster with the bottom of the decking.
The Rack & Roll Safety Dolly Cart has locking stems and wheels on the casters that are foot operated making it very easy to use.
The uni-body design is formed and welded out of one piece of sheet steel. The sides are bent down and bent in and seems welded to make this an extremely strong steel box. This box is then powder coated for the best coating to stand up against the elements and wear and tear.
The vertical post brackets are attached from the outside making them extremely strong and durable.
The eight American made 56″ steel 16 gauge posts can be used vertically or horizontally to carry a variety of loads.
The dolly is ideal for loading materials onto a panel saw. You can simultaneously pull materials to be cut from the dolly while putting the cut pieces back on the dolly saving the need and space for two carts.
It can be used as a material dolly for Sign Shops to be used as a rolling rack, taking materials to the printers/cutters or unloading a truck. It can simultaneously load a printer from one slot and hold the printed material in another.
It is used for furniture movement, mattress movement, TV movement or just about any type of merchandise movement where you might need more ground clearance or locking casters.
30″L x 25″W x 9-5/8″ H