Glass Shower Hardware

Product Details: Matte Black finish, Brass 135 Degree slip over glass clamp. The clamp is held in place with a set screw in each leg. Designed to aid with the pressure positioned on glass panels in frameless shower applications. Also offers secure...

Satin Silver Anodized Frameless Shower Door Half-Round Aluminum Threshold. The low profile contour shape is gentle on the feet while providing a good dam to allow water to drain back into the shower floor. It is normally mounted directly under the...

Brushed Nickel Finish, Tubular 18" Single-sided shower glass towel bar. The low profile end caps are ideal for use on bypass sliding doors. Fabricated from 3/4" Diameter heavy wall brass tubing. These shower door towel bars include clear plastic...

Kingston Beveled Series, Brushed Nickel Finish wall mount frameless shower door hinge with offset back plate. This jumbo version of our standard rotunda hinge provides the maximum rated capacity of any shower door hinge on the market. Solid Brass...

Chocolate Brown,Square 6" back to back shower door pull handles.The square design make this handle the Ideal choice to match our Plaza series square cornered hinges  Fabricated from heavy wall brass tubing. These shower door handles include clear plastic...

Brushed Nickel Anodized Aluminum Standard Shallow 1/2" U Channel. This low profile U Channel is designed for use as a bottom or side support for 1/2" glass panels. Aluminum U Channel is most commonly used in frameless glass shower installations. 95" Long.

American Classic Series, Brushed Nickel finish 135 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are...

Plaza Series, Brushed Nickel Finish curb (bottom) mount frameless shower door pivot hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are...

Chrome Plated, Tubular 6" back to back shower door pull handles. Fabricated from 3/4" Diameter heavy wall brass tubing. These shower door handles include clear plastic handle end washers as well as interior plastic washers to protect glass against...

Chrome Plated, Tubular 18" Single-sided shower glass towel bar. The low profile end caps are ideal for use on bypass sliding doors. Fabricated from 3/4" Diameter heavy wall brass tubing. These shower door towel bars include clear plastic handle end...

Solid Brass Chrome Rounded Interior Shelf Clamp. Designed to be used to secure a shelf for lightweight articles. Clamps should be secured to wall with screws (included) in studs, or with Molly-type anchors. A Nylon tip brass set screw secure the glass...

Kingston Series, Chrome plated wall mount frameless shower door hinge with short back plate. This jumbo version of our standard plaza hinge provides the maximum rated capacity of any shower door hinge on the market. The short back plate is preferred on...

Chrome Plated 1-1/8" Style Washers. These washers add a stylish look to our 3/4" diameter back to back shower door handles. These decorative solid brass washers also serve to cover any hole defects in glass. 1/8" Thick x 1-1/8" Diameter. Pack of Four...

Brite Silver Anodized Frameless Shower Door Half-Round Aluminum Threshold. The low profile contour shape is gentle on the feet while providing a good dam to allow water to drain back into the shower floor. It is normally mounted directly under the...

American Classic Series, Brushed Nickel finish 180 Degree glass to glass shower door hinge. Solid Brass construction with all moving parts (pins and springs) in precision machined stainless steel. These square edge shower door hinges are...

Plaza Series, Chocolate Brown finish 2" x 2" wall mount operable transom pivoting clip. These square edge clips are designed to rotate a movable transom glass off a wall for frameless shower applications. Solid Brass construction. For use with 3/8" -...

Chocolate Brown Finish, Single-sided Cylinder Style Shower Door Knob. Knob measures 3/4" in diameter and stand 1-1/4" from the door surface. The end cap stands 5/32" from the door surface. Solid Brass construction. These shower door knobs include...

Chocolate Brown finish, Brass 135 Degree slip over glass clamp. The clamp is held in place with a set screw in each leg. Designed to aid with the pressure positioned on glass panels in frameless shower applications. Also offers secure positioning of...

19mm Diameter Round Tubing Back To Back  Shower Door Pull Handle Without  Washers 3/4"(19mm) Diameter Brass Tubing Designed for 1/4"(6mm) and 1/2"(12mm)Glass 8"-30" Center Spacing All Available

Deluxe, 135 Degree corner shower door header brackets. Solid Brass construction. These brackets slide into each end of the shower header and are secured into the slot with the attached Allen screws.